How to make drip irrigation on your property yourself?

In order for plants in the garden to develop well, they must be systematically watered. To do this, you can use drip irrigation. In this way, you can provide the necessary moisture and fertilizer to plants. How to make your own drip watering? This is not a difficult task. The main thing is to understand the main nuances.

Content:

• What is drip irrigation?
• What are the possibilities and advantages of drip irrigation?
• What is needed for further construction of the structure?
• Step-by-step manufacturing instructions

What is drip irrigation?

In different parts of the world, owners are thinking about saving natural resources, since they need to pay money for them. But you want to harvest a great harvest without using a lot of water. An automatic watering system can help in such a situation. This is a convenient design that allows you to save money on paying for natural resources and provide regular watering in your garden. You can do it yourself.

What are the possibilities and advantages of drip irrigation?

The main advantage of such automatic watering is that the water supply is provided at the right time in the required quantity. The owner must use the design correctly, then he will receive a high-quality harvest that he did not have before. This happens because watering helps the plant develop and helps it breathe.

In addition, it can be diluted in water fertilizersI.Dissolving, they will quickly penetrate to the rhizomes of plants that have been planted. This feeding shows excellent results at the end of the season during harvest. In addition, in this method the leaves are protected from burns, which often occur during the usual method of feeding and watering.

What is needed for further construction of the structure?

Before you start building a structure, you need to understand the principle of its operation. Otherwise, you may not be able to do drip irrigation yourself. The operation of this system is quite simple. A source of water must be provided for it. It represents a large capacity. If it is small, then it is often necessary to fill the water.

But you shouldn’t take a container that is too large, as it requires a lot of space. The construction requires filters and shut-off valves. The design must include several cranes. With the help of one, the water will open. It can be closed with a storage tank.

Another tap is used to drain water if the structure needs to be repaired. It is also used to empty the container before winter. The filter allows you to purify water, rid it of debris and clogging. For the construction it is necessary to acquire pipelines. They must be of two types:

1. Tough. Used for main pipelines.
2. Soft. With their help, drip irrigation occurs.

In order to assemble the structure, a variety of tees are needed. In order not to suffer too much, it is recommended to buy a special sleeve that is designed for this type of glaze. It already has small holes through which water will appear.Of course, it is quite expensive. If a person cannot afford it, then you can get by with special nozzles.

But they must be installed under each plant. Therefore, it will be more profitable to buy a special sleeve. It will be much cheaper. These are the most basic details that will be needed for the construction of drip irrigation. But, taking into account the peculiarities of the summer cottage, other little things may be required. After this, you can begin building the structure.

Step-by-step manufacturing instructions

Collecting drip irrigation is not a difficult task. It will be especially easy to do it for those who have some knowledge and experience in such a matter. If a person has never assembled such a pipeline, then he needs to understand all the nuances. To build drip irrigation, you must follow a certain sequence.

Video on how to build drip irrigation at your dacha:

Initially, a storage tank is prepared and installed. To do this, it is worth placing the container that has been prepared in a certain place. This should be the highest point in the country. It is recommended to raise it a meter above the ground. For this purpose, the structure itself for support is initially welded. It is often made from stone. After this, a reservoir is attached to it.

After this, a squeegee is cut into this tank. There is no need to use welding for this. The squeegee must have a thread. One should be long and the second should be short. There should also be 2 locknuts and rubber seals. Also suitable for this is raw rubber material, which is cut into strands 1 centimeter wide.

Initially, the lock nut is screwed onto the squeegee, after which it is inserted into the hole that was drilled in the container. Next, another lock nut is screwed onto it from the inside. Between the barrel itself, into which water will be poured, and the locknut, the rubber material is wound. After such manipulations, it is necessary to tighten the nut tightly. If raw rubber is used, then it is recommended to also use washers. Next, a filter is installed, as well as an adapter with which the pipes will be connected.

This is standard procedure. When everything is done, it is worth starting to lay the main line for the entire drip irrigation structure. Each bed should have a tee. Initially, the pipe is laid, it must be solid.

It is located across all the beds. After this, it is connected to the tank. Next, near all the beds, you need to cut the line where the tee is placed. If it is necessary, then it is worth constructing a threaded end. Another adapter will be screwed into it to connect the hose for the irrigation structure.

The main pipeline must end with a threaded end. There should also be screwing. This is necessary to ensure that liquid is drained from the entire structure if it breaks or needs to be emptied. winter period.

Next, branches are laid for watering. To do this, you can use a regular hose that is used to water the beds. On the one hand, it is muffled, where there is no connection to the main line. You can also use a ready-made hose purchased for drip irrigation.

Each owner decides for himself which option to lean towards.Financial capabilities are also taken into account here. When the hose is connected to the tee, then it is worth running it in all places in the garden where plants grow. To do this, small holes are pierced. Initially, their size should be minimal.

If necessary, they can be increased. An irrigation branch will run along each bed. The hose should be close to landings. Don't forget to seal the other end. So, a drip irrigation system is an excellent opportunity to save water, provide plants with the necessary moisture, and also provide fertilizing. You can build it yourself. The main thing is to take into account various nuances.