How to build a toilet on the street with your own hands without any problems!

A toilet house is one of the most important human needs in a garden plot. Despite the fact that in a cozy house Location on There may already be a toilet; amenities on the street will never be superfluous. The design of the building is so simple that even a person without relevant experience can implement it.

Content:

• How to properly build a toilet on the street?
• Selection of materials and tools
• Step-by-step instructions for making an outdoor toilet
• Installation of exhaust ventilation, doors and lighting

How to properly build a toilet on the street?

This is not a difficult task, the most important thing is to create or find a drawing, calculate and select durable building materials. Typically, the material for building a toilet is edged boards, but you can also build it from plywood. The choice of toilet type is small; there are two options: a toilet without a cesspool or with one.

A toilet in which there is no cesspool, otherwise called a powder closet, is a structure that has been tested over the years, which consists of a pit and a house above it. When the cesspool is full, it is either cleaned out manually or the appropriate services are ordered. A toilet without a cesspool is a backlash closet.

This type of toilet house is built more often when the toilet is not used much, or when the land is located high to the surface of the earth. groundwater. A bucket, barrel, etc. can act as a container for collecting various sewage.The difference from a powder closet is that after each visit to such a toilet, the sewage can be immediately disposed of, or sprinkled with peat to obtain fertilizer.

Selection of materials and tools

Now that you have completed choosing a toilet house on your site, you need to decide on the necessary materials and tools for its construction. So, for construction you will need the following materials:

• Edged board in the amount of 4 pcs. size 50x100x6000 mm, and in quantity 3 pcs. size 32x90x6000 mm
• Lining in the amount of 40 pcs. size 87x3000 mm.
• Sand – 2 buckets
• Ruberoid in an amount of approximately 2 m
• 2 sheets of 8-wave slate
• Door and door block with corresponding fittings
• Varnishing composition for the final coating of the toilet, as well as an antifungal composition
• Fastening elements (nails, screws)

In addition to the above list of materials, you can purchase polystyrene foam to insulate the inside of the toilet.

Step-by-step instructions for making an outdoor toilet

First of all, if the choice falls on a powder-closet toilet, you need to dig a cesspool. There are two types of pits: sealed and absorbent. To build a sealed pit, you need to concrete its bottom, as well as the walls, followed by sealing the seams with bitumen.

The name of the absorption pit speaks for itself: the bottom of such a pit must reach the sand so that the sewage goes into the ground. Most often, the shape of the pit is square, and the depth is 2-2.5 meters. Before starting to build the toilet house itself, the pit must be covered with slate or concreted, leaving only the area under the toilet seat free.

Directly construction house.The average size of a toilet is usually 1.5x2 m, and the height is no more than 2.5 m, but this is all individual and depends on the size of the people for whom our building is intended. At this stage, it is best to use a drawing that you can build yourself or use a ready-made one, since it is from it that you can preliminarily calculate the amount of necessary materials, as well as their cost.

The next stage is the construction of the frame. The base can be, for example, four support pillars installed and then poured with concrete, or a shallow foundation. Then you need to assemble the frame. Most often this happens according to the following scheme: the frame of the walls is assembled from timber, and the front wall should be slightly higher than the back one so that the roof is sloped.

A door block is fixed in the front wall and appropriate reinforcements are made for the future door, and if desired, a window is also decorated. Assembling the toilet seat frame and covering. This stage can be considered additional, since you can install a floor-mounted toilet.

You can sheathe the frame with boards in different ways: vertically and horizontally, and both have their advantages: the vertical position saves material consumption, and the horizontal position looks like an interesting design solution. By the way, instead of a board, you can use slate or any other material you want.

Forming a slot in the floor. You can completely trust the choice of the shape of the hole to your taste and imagination: from a simple circle to a heart, the main thing is not to forget about the diameter - at least 0.3 m. Treatment of elements with antibacterial impregnation in order to protect against various influences of moisture and pests.

Video instructions on how to build a toilet in the country:

Then you need to build the roof of the toilet house. The roof should not protrude more than 0.3 m beyond the frame itself. First, we fasten parallel boards at a distance, then we sew up the visor from below and fasten the boards along the perimeter. We lay roofing felt on the base and cover it with slate or some other roofing material. The roof is often made flat, but a different option can be made by selecting the appropriate drawing.

Installation of exhaust ventilation, doors and lighting

To do this, you can use a regular plastic pipe with a diameter of 0.1 m, the upper edge of which rises above the roof by about 0.2 m, and the lower edge is located in the cesspool.

Installation of a toilet door. The door can be used either homemade or purchased plastic or wooden. As a locking mechanism, it is better to choose something simpler, for example, ordinary hooks or latches, since locking systems, when left outdoors for a long time, can be subject to various precipitation and become unusable ahead of schedule.

Installation lighting systems. This stage is also optional, but still necessary for greater comfort. There are a lot of options for choosing a system: from a wall lantern to electrical wiring to the toilet. If you do not use the toilet at night, you can get by with a window cut out above the doors.

And finally, a little advice: in order for your structure to serve you as long as possible, do not throw various hygiene and other items into the cesspool, but place a trash can nearby.

As you have seen for yourself, there is absolutely nothing complicated in the process of building a toilet on the street.You can show your imagination and develop your own version of the toilet house. In any case, your neighbors will definitely take an interest and ask for your advice on how best to build a toilet house, and even on their own.