KNS are functionally complex wastewater systems

Sometimes the wastewater is drained independently, but in other cases a water pumping station needs to be adjusted. The complexes include control cabinets, pumps, sensors, pipes of the required diameter, as well as other components. A properly constructed and commissioned sewage pumping station ensures constant drainage of domestic, industrial and storm water.
The principle of operation of the sewage pumping station is that sewage is discharged through a pipeline into a reservoir. Pumping units are mounted at the bottom of the pumping station, they are attached to the pipes and, then, wastewater is supplied into the pipeline under pressure. Valves installed on pipeline units prevent wastewater from returning into the pipeline. The grid is installed to filter out large debris and prevent damage to the pumps.
You can get to the pumping station through the top hatch, to which there is a ladder. The ventilation pipe serves as an air passage; it is also located in the upper compartment of the pumping station.

Types of sewage pumping stations
Helyx offers CNS depending on operating conditions and customer requirements:
1.Dry execution. Of two compartments: working and receiving. The first contains pumping stations and a control room, and the second contains wastewater. This type of pumping station is very easy to use.
2.Horizontal design. This type of SPS is widely used for storm drains and in emergency flooding situations.
3.Vertical design. Most in demand.The reliability of Helyx enclosures can only be compared with reinforced concrete structures.
4.With submersible pumps. Pumps act as reservoirs and make it possible to reduce dimensions and improve sound insulation, as well as reduce the cost of the structure.
Application of sewerage stations
Sewage complexes provide wastewater discharge for residential buildings and industrial enterprises.
Pumping stations are divided into:
• Household pumping station. Can be installed in private houses, apartments, and other types of residential premises.
• Industrial pumping stations. These complexes are more extensive and cover entire enterprises at once. Accordingly, such pumping stations are equipped with large-diameter pipes and powerful technical units.
The composition of the hull, equipment capabilities and other parameters must correspond to the size and operating conditions of each object individually.
terms of Use
The operating time and reliability of the pumping station depend on the quality of the work performed and compliance with safety measures. Loads on the unit can lead to failure and occur due to incorrect axis tilt.
Important points when installing a pumping station:
1. Leveling the surface. The plane must be level. Often the surface for installing the pumping station is additionally concreted.
2. Carrying out work according to standards. Ensuring work in accordance with the requirements of SNiP 305.0685 and installation of sewerage equipment.
3. Maintain the starting position. To avoid the body being pushed out by groundwater, it is necessary to compact the soft soil.
For long-term operation and reduction of capital costs, it is necessary to approach the installation of the pumping station in full compliance with operating conditions. Helix complexes work reliably and efficiently if installed correctly.